Gefen GTV-WHD-1080P-LR-BLK - Manual (Page 23)

19
3. Once the desired source has been selected, press the OK button.
4. The screen will go blank momentarily and the “Connecting to....” status
message will be displayed, indicating that the Receiver unit is switching to
the selected Sender unit (source).
5. After a few moments, the selected source signal will be displayed.
Select Video Source
STB
BluRay
Setup
Connected to Sender
TIP: Use the INPUT DEVICES buttons (see page 9) on the IR
Remote Control to bypass the Select Video Source menu and
directly switch to another Sender unit.
OPERATING THE WIRELESS FOR HDMI