Grizzly G5959Z - Manual (Page 13)

G5959Z 12" Left-Tilting Table Saw -11-
The Model G5959Z is shipped from the manufac-
turer in a carefully packed carton. If you discover
the machine is damaged after you have signed
for delivery, please call Customer Service imme-
diately at (570) 546-9663.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
The G5959Z is a heavy
machine, 635 lbs. ship-
ping weight. DO NOT
over-exert yourself
while unpacking or
moving your machine –
you will need assis-
tance and power equip-
ment. Serious personal
injury may occur if safe
moving methods are
not followed.
Make sure floor structure
is capable of supporting
the combined weight of
the machine, acces-
sories and people.
Some metal parts may
have sharp edges on
them after they are
formed. Please examine
the edges of all metal
parts before handling
them. Failure to do so
could result in injury.
Piece Inventory
After all the parts have been removed from their
containers, you should have:
1. Table Saw Cabinet (Not Shown)
2. Miter Gauge
3. Extension Wings (2)
4. Fence
5. Splitter/Guard Assembly
6. Splitter/Guard Support Shaft
7. Hardware Bag
8. Arbor Spanner Wrench
9. Open End Wrench (2)
10. Hex Wrench Set
11. Arbor Extension Assembly
12. Motor Cover
13. Dado Table Insert
14. Standard Table Insert (Not Shown)
15. Fence Angle Irons (2)
16. Fence Rail
17. Tool Box
In the event that any nonproprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them; or for the sake of expedien-
cy, replacements can be obtained at your local
hardware store.
Figure 6. G5959Z component layout.
3
4
5
6
7
8
9
10
17
11
12 2
13
15
15
16
Unpacking