Blocking, Cable cc1, Auto – Gateway 30 inch LCD TV User Manual

Page 38

Advertising

www.gateway.com

TV - TV input

SOURCE. Sets the source for the tuner.

AIR sets the tuner for an antenna.

CABLE sets the tuner for cable or a satellite dish.

CABLE MODE. Specifies the type of cable system you
subscribe to. Options include Standard, HRC, IRC, and
Auto. For most cable systems, you can set this value to
Auto. However, if you are not receiving all the channels you
subscribe to, you may need to set this value.

CHANNEL SCAN. Adds all channels that have a signal to
the channel list. This list is used by the CH and

buttons.

CC MODE. Turns captioning on and off and selects the
closed caption style.

PARENTAL CONTROLS. Activates parental controls. For
more information about Parental Controls, see the
BLOCKING menu.

You need the remote control to use parental controls. For
more information, see your remote control user guide.

BLOCKING

CHANGE PASSWORD. Changes the password used for
modifying the parental control settings or watching a
program blocked by the parental controls. For more
information, see

“Setting a password” on page 39

SETUP TV BLOCKING. Sets the level of television shows
that will be blocked without typing in the password. For
more information, see

“Setting parental controls” on

page 36

SETUP MOVIE BLOCKING. Sets the level of movies that
will be blocked without typing in the password. For more
information, see

“Setting parental controls” on page 36

BLOCKING ENABLE. Turns TV and movie blocking on or
off.

KEY LOCKOUT. Locks the LCD TV so it cannot be
controlled using the buttons on the front of the TV. For more
information, see

“Using key lockout” on page 40

IR LOCKOUT. Locks the LCD TV so it cannot be controlled
using the remote control. For more information, see

“Using

IR lockout” on page 41