GE 26980 - Manual (Page 22)

22
HEADSET
H
EADSET AND
B
ELT
C
LIP
O
PERATION
C
ONNECTING A HEADSET TO
THE HANDSET
For hands free conversation, connect
the headset (provided with 26981
only) to the HEADSET jack as shown.
The handset receiver and microphone
are disabled when the headset is
connected.
Adjust the headset to rest comfortably
on top of your head and over your ear.
Move the microphone to
approximately 2 to 3 inches from your
mouth.
• Press the TALK button to answer or
place a call before using the
headset.
C
ONNECTING THE
B
ELT
C
LIP
There are two slots, one on each side
of the handset.
• Attach the belt clip (provided with
26981 only) by inserting the sides of
the belt clip into the slots. Snap the
ends of the belt clip into place.
Handset
jack
Headset
plug
Slot for
belt clip Slot for
belt clip