Geemarc BDP400 - Manual (Page 20)

19
The telephone will then say: "Set month" and the month
number digits on the display will flash. Press either the
"
" or " " button to toggle through the months in
numbers between 1-12 (each of which will be shown and
announced as a month), and press "Ok" button to confirm
when set.
Press the "PB" button to exit and the telephone will beep.
Area Code setting
To set the Area Code setting, press the "Menu" button to
enter the menu. The display will show and announce the
word "Store". Press either the "
" or " " button until you
reach "Setting" and press the "Ok" button. Press either
the "
" or " " button until you reach "AREA CODE" and
press the "Ok" button. Enter the desired area code (3
digits) by using the keypad. Press "Ok" button to confirm.
Press the "PB" button to exit and the telephone will beep.
Settings
OPERATION OPERATION
Settings