Grizzly G5049Z - Manual (Page 10)

-8- G5049Z Combination Sander
SECTION 4: ASSEMBLY
Figure 2.
Figure 4.
Figure 3.
Stand/motor
2. Carefully tip the sander on its side and attach
the four legs to the stand top and the cross
braces to the legs.
3. Lift the sander upright and remove the
cover. Figure 3.
4. Attach the motor mount to the underside of
the stand. Finger tighten only.
Figure 4.
The G5049Z Combination Sander stand is an
open frame style.
Note: Assembling the G5049 Sander requires
heavy lifting. We strongly recommend having an
assistant help with the assembly.
1. Attach Rubber Feet to base using the four
5 ⁄
16
''-18 x 1'' Hex bolts, Hex Nuts and Flat
Washers provided. Figure 2.