Intercom operation, Receiver volume control, Making an intercom call – GE 28115 Series User Manual

Page 22: Receiving an intercom call

Advertising
background image



Receiver Volume Control

When the handset is

ON (in talk mode) you may adjust the receiver volume by pressing the

vol/CID ( 6 or 5) button. There are four volume levels to choose from. When the maximum

or minimum volume level is reached, the phone beeps twice. VOL 1 is minimum and VOL 4 is

maximum.

Intercom Operation

(applicable only with additional handsets)

The intercom feature allows you to have a conversation with another registered handset

without tying up the telephone line, allowing you to still receive incoming calls.

Making an Intercom Call

1. Make sure the handset is

OFF (not in talk mode).

. Press the del/conf/intercom button on the handset.
. Use the touch-tone pad to select the handset you want to page.

NOTE: To cancel page, press the del/conf/intercom button again or the end

button on the sending handset.

4. Wait for the person at the receiving handset to press the del/conf/intercom button.

NOTE: If the receiving handset does not answer within two minutes, the

intercom call is automatically canceled. The originating handset displays

NO ANSWER.

5. When finished, press the end button or del/conf/intercom button on either handset to

deactivate the intercom.
NOTE: The system is expandable up to 6 handsets (by purchase of optional

Model 28106 handset with recharge cradle). When 6 handsets are

registered, the system can handle 2 separate intercom operations at once,

for example, 1st handset intercoms with 2nd handset while 3rd handset

intercoms with 4th handset.

Receiving an Intercom Call

When you receive an intercom call, your handset beeps. To answer the call press the del/conf/

intercom button, talk or speaker button.

Advertising