Global Machinery Company ELC2000 - Manual (Page 3)

3
Description of symbols
The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Double insulated
for additional protection.
Conforms to relevant standards for
electromagnetic compatibility.
Don’t use one handed.
Don’t use in the wet.
Don’t use point of the bar.
Hold the electric chainsaw with two hands.
If cordset is damaged or cut discontinue use and
remove it from the mains immediately.
Use cutting length of the bar.
Specifications
Nominal Voltage: 230-240 Vac ~ 50Hz
Rated Power:
2000W
Cutting Speed: 10m/s
Oil Tank Capacity: 250ml
Chain Brake:
0.15 Sec.
Protection class: Double insulation
Bar Length:
400mm, 16”
Acceleration: Rear Handle under load 3.79 m/s 2
Front Handle underload 4.96 m/s 2
Sound Power Level Under Load: 97 dB(A)
Acoustic Pressure Level Under Load: 86 dB(A)
Weight 5.8Kg
Introduction
Your new GMC power tool will more than satisfy your
expectations. It has been manufactured under stringent
GMC Quality Standards to meet superior performance
criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years of
dependable service.
CAUTION. Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Environmental protection
Recycle unwanted materials instead of
disposing of them as waste. All tools, hoses
and packaging should be sorted, taken to
the local recycling centre and disposed of
in an environmentally safe way.