GE Triplex DVMRe 4eZT - Manual (Page 40)

0150-0198H 40 DVMRe Triplex eZ
Notify Vidloss:
Notify Record:
Notify Menu Access:
Notify Connection:
Email User 1:
Email Domain 1:
Email User 2:
Email Domain 2:
Local User:
Local Domain:
SMTP Server:
Notify Alarm:
Notify Archive:
Notify Power Up
SMTP Port:
john.doe
somecompany.com
jane.doe
somecompany.com
0. 0. 0. 0
DISABLE
DISABLE
DISABLE
ENABLE
jim.doe
somecompany.com
25
DISABLE
DISABLE
DISABLE
Email Notification Setup
Format of email address: user@domain
Warning: Region/Time Zone must be set correctly!
[CANCEL] [OK]
One or more of these
fields must be set to
ENABLE to receive an
email notification of
the selected event.
Email Address Format
The format of the email addresses should be entered as follows. If the email address to be notified is
[email protected] , then john.doe should be entered in one of the Email User fields and
somecompany.com should be entered in the subsequent Email Domain field.
q Main Menu → Alarms → Archive Alarms
Selecting Enable from this menu will cause the unit to activate
Relay 2 if a malfunction occurs while archiving.
3.11 Macro
A macro is a recorded sequence of keystrokes. The number of macros depends on the number of
camera inputs (4, 10 or 16). Each macro can have up to 32 keystrokes.
Use this menu to:
• Enter Macro Record mode.
• Program a scheduled start time for a macro.
q Main Menu → Macro → Macro Record
Note: Do not attempt macro programming while the front panel is locked.
To begin recording a macro:
1. Select the macro number you wish to record, then press the
Enter button. The unit will automatically exit the menu
system and go to a starting point. Macro Record mode
is indicated as F and the Macro Number on-screen.
2. From this point, begin recording the desired keystroke sequence. Record up to 32 keystrokes. If
32 keystrokes are exceeded, the unit will end the macro recording automatically.
Archive Alarm
ENABLE
Relay 2
Macro Record
01
Select Macro
Macro Record
Timed Macro Start