GE E840S User Manual

Page 81

Advertising
background image









By using the USB cable, you can transfer the

captured photos and videos to a PC. Follow

the steps below to connect the camera to a

PC.
1. Start a computer to which ArcSoft
software has been installed.
2. Make sure both the camera and PC are
turned on.
3. Connect one end of the supplied USB
cable to the USB/AV OUT port on your
camera.
4. Connect the other end of the cable to an
available USB port on your PC.

5. Disconnect the camera once transfer is

completed.

If the USB option is set to [PC] :

Turn the camera off and disconnect the USB
cable.

If the USB option is set to [PC (PTP) ] :

Remove the camera from the system as described
below before turning the camera off and
disconnecting the USB cable.

Window XP Home Edition/XP Professional

Click the [Safely Remove Hardware] icon ( )
in the taskbar and select [Safely remove USB
Mass Storage Device] from the menu displayed.

Advertising
This manual is related to the following products: