GE 26958 - Manual (Page 11)

11
6. Place the corded handset in the base.
7. Plug the power supply cord into the 12V
DC power jack on the back of the base
and the other end into an AC electrical
outlet.
8. Plug the short telephone line cord into
the PHONE LINE jack on the back of the
base.
9. Feed the short line cord through the
grooves provided so that the base area
is flat and ready to mount on the wall,
and plug the other end of the line cord
into a modular phone jack.
10. Slip the mounting holes on the base
over the wall plate posts and slide the
unit down firmly into place. (Wall plate
not included).
11. Raise the base antenna.
Installation continued on next page.
VERY IMPORTANT: You must complete
the corded base unit connections before the
cordless handset can be used. Otherwise, it
WILL NOT work. See steps 1-8 of this
section.
6
7
8
9
10
11