Broiling, How to set the oven for broiling – GE ZET2S User Manual

Page 14

Advertising
background image

14

If the meat has fat or gristle around the
edge, cut vertical slashes through both about
2

″ apart. If desired, the fat may be trimmed,

leaving a layer about 1/8

″ thick.

Place the meat or fish on the broiler pan
and grid. Always use the grid so that any
fat will drip into the broiler pan; otherwise
the juices may become hot enough to catch
on fire.

Position rack in oven.

Close the door. Always broil with the door
closed.

Turn the Oven Mode knob to DUAL BROIL
(for larger food quantities) or STD BROIL
(for smaller food quantities).

Turn the Temperature knob to LOW BROIL
or HIGH Broil. The broiling temperature
will be automatically set.
LO or HI will appear in the display
depending on the automatic broil
temperature selected.

The oven and the oven interior lights will
turn on immediately and stay on until the
oven is turned off.

When broiling is finished, turn the
Oven Mode knob and the Temperature
knob to OFF.

NOTE:

A cooling fan will turn on to cool

internal parts. This is normal, and the fan
may continue to run even after the oven is
turned off.

The broiler does not need to be preheated
for most broiling. However, foods that cook
quickly, such as thin strips of meat or fish
may require a short preheating period of
2 to 3 minutes to allow the food surface to
brown in the same time the food takes to
be cooked throughout.

Turn the food only once during broiling.

NOTE:

Broil will not work if the temperature

probe is plugged in. Never leave your probe
inside the oven during a broil cycle.

Broiling

Wall Oven

How to set
the oven
for broiling

Close the door. Always broil with the door closed.

Oven Mode knob

Temperature knob

Advertising
This manual is related to the following products: