Graco Inc. 309323E - Manual

309323E
ti6623a
INSTRUCTIONS–PARTS LIST
Important Safety Instructions
D Read all warnings and instructions
in this manual. Save these
instructions.
Pressure Roller with 20”
Fixed Extension
Model 244279, Series C
D 20 in. (50 cm) heavy-duty extension
D 9 in. (23 cm) roller frame
D
1/2 in. (13 mm) nap roller cover
D 45 ° swivel adapter
3600 psi (24.8 MPa, 248 bar) Maximum Fluid Inlet Pressure *
The best operating pressure is the lowest pressure that provides
an even paint supply to the roller and typically does not exceed
300 psi (2.1 MPa, 21 bar). *
CAUTION
Never leave water in the pump, gun, or pressure roller.
Doing so could cause corrosion and damage from freezing.
For storage, flush the system with Graco Pump Armor
t
or
mineral spirits/paint thinner.
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441
E COPYRIGHT 2001, GRACO INC.
Graco Inc. is registered to I.S. EN ISO 9001