GIGABYTE GA-8GEM667 - Manual (Page 37)

- 33 - BIOS Setup
English
! ! ! ! ! Onboard LAN Boot ROM (*)
!Enabled Enabled onboard LAN Boot ROM.
!Disabled Disabled onboard LAN Boot ROM.(Default value)
! ! ! ! ! Onboard Serial Port 1
!Auto BIOS will automatically setup the port 1 address.
!3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8. (Default value)
!2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8.
!3E8/IRQ4 Enable onboard Serial port 1 and address is 3E8.
!2E8/IRQ3 Enable onboard Serial port 1 and address is 2E8.
!Disabled Disable onboard Serial port 1.
! ! ! ! ! Onboard Serial Port 2
!Auto BIOS will automatically setup the port 2 address.
!3F8/IRQ4 Enable onboard Serial port 2 and address is 3F8.
!2F8/IRQ3 Enable onboard Serial port 2 and address is 2F8. (Default value)
!3E8/IRQ4 Enable onboard Serial port 2 and address is 3E8.
!2E8/IRQ3 Enable onboard Serial port 2 and address is 2E8.
!Disabled Disable onboard Serial port 2.
! ! ! ! ! UART Mode Select
(This item allows you to determine which Infra Red(IR) function of Onboard I/O chip)
!ASKIR Set onboard I/O chip UART to ASKIR Mode.
!IrDA Set onboard I/O chip UART to IrDA Mode.
!Normal Set onboard I/O chip UART to Normal Mode. (Default Value)
! ! ! ! ! UR2 Duplex Mode
!Half IR Function Duplex Half. (Default Value)
!Full IR Function Duplex Full.
! ! ! ! ! Onboard Parallel port
!378/IRQ7 Enable onboard LPT port and address is 378/IRQ7. (Default Value)
!278/IRQ5 Enable onboard LPT port and address is 278/IRQ5.
!Disabled Disable onboard LPT port.
!3BC/IRQ7 Enable onboard LPT port and address is 3BC/IRQ7.