GE WPGT9350 - Manual (Page 17)

17
Loading and Using the Washer
www.GEAppliances.com
Sorting Wash
Loads Sort by color (whites, lights, colors), soil level,
fabric type (sturdy cottons, easy care, delicates)
and whether the fabric produces lint (terry
cloth, chenille) or collects lint (velveteen,
corduroy).
Loading the
Washer Load dry items loosely, no higher than the top
row of holes in the washer basket. Overloading
may reduce washer efficiency and possibly
increase wrinkling.
Bulky items should be placed as far down in
the wash basket as possible for optimal results.
Always place buoyant items at the bottom of
the wash basket.
The washer will automatically detect the load
size. Because of the high-efficiency wash system,
the water level may not completely cover the
load. To add items after washer has started, lift
the lid, add items and close the lid.
• Do not wash fabrics containing flammable
materials (waxes, cleaning fluids, etc.)
• The washer will not fill or operate with the
lid open.
Always follow fabric manufacturer’s care label when laundering.
Bleach
symbols
Any bleach
(when needed)
Only non-chlorine bleach
(when needed)
Do not bleach
Bleach Labels
Fabric Care
Labels Below are fabric care label “symbols” that affect
the clothing you will be laundering.
Washer
Temperature
Ranges
Category Target Temperature Comment
Tap Cold Varied Temperature dependent on cold water supply to home
Cold 63°F ATC** controlled
Warm 80°F ATC** controlled
Hot 112°F ATC** controlled
Very Hot* 140°F ATC** controlled. Actual temperature range is
determined by cycle type and time selected.
NOTES:
Use HE (high efficiency) labeled detergent. HE detergents are available that provide good cleaning
performance in hot, warm or cold water temperatures.
* This temperature category is only available in certain selected cycles. Always check garment label for
recommended washing instructions.
** ATC stands for automatic temperature control, which targets a water temperature range in which clothes
are washed.
For Model WPGT9360 only