Garmin montana 600 - Manual (Page 7)

Getting Started
Montana 600 Series Owner’s Manual 3
4. Insert the battery into the
compartment, contacts first.
5. Gently press the battery into place.
6. Replace the battery cover, and turn
the D-ring clockwise.
Charging the Lithium-ion Battery
Pack
notice
To prevent corrosion, thoroughly
dry the mini-USB port, the weather
cap, and the surrounding area before
charging or connecting to a computer.
Before you use the device the first
time, fully charge the battery. Charging
a depleted battery takes 4½ hours. The
device will not charge when outside
the temperature range of 32°F to 113°F
(0°C to 45°C).
1. Plug the AC charger into a standard
wall outlet.
2. Pull up the weather cap
➊
from the
mini-USB port
➋
.
➊
➋
3. Plug the small end of the AC
charger into the mini-USB port.
4. Charge the device completely.
The device may feel warm when
charging.
Removing the Lithium-ion Battery
Pack

WARNING
Do not use a sharp object to remove
batteries.
1. Remove the battery cover.
2. Pull up on the side of the battery
that is closer to the key.