Geemarc AMPLIVOICE50 - Manual (Page 13)

13
Press MENU
Use ▲ or ▼ to select TONE/PULSE
Press DIAL to select
Use ▲ or ▼ to select the desired method, TONE or PULSE 40/60
Press DIAL to select
Press CID to exit
Ringer Volume Setting
A switch located on the right side of the AmpliVOICE50 unit allows the
ringer to be switched to LOW, MEDIUM or HIGH.
Making a Call
Pick up the handset.
When you hear the dialling tone, dial the number on the keypad.
The number will be displayed on the LCD display
To end the call simply replace the handset in the cradle
Pre-dialling
If VOICE is activated, once you press the number keys 0-9 you will hear the
number being dialled.
Key in the required number without lifting the handset..
Use DELETE if necessary to cancel and correct a wrong digit
Lift the handset OR press DIAL OR press and the number
will be automatically dialed
To end the call simply replace the handset in the cradle OR press
USING THE TELEPHONE