GE eKEY - Manual (Page 47)

Chapter 3
KeyBoxes
39
CBS codes
Every KeyBox contains a Call Before Showing (CBS) code that
you can activate using the Manage KeyBoxes menu option of the
eKEY application. (See
Changing KeyBox settings on page 42 for
more information.) The CBS code allows the listing agent to
control KeyBox access by requiring the showing agent to call for
preauthorization before opening the KeyBox. If the CBS code is
active in a KeyBox, you must enter the CBS code into your PDA
before accessing the KeyBox. Contact the listing agent to
determine if a CBS code is required to open a KeyBox.
To enter a CBS code into your PDA, do the following:
1. Open the eKEY application. If you are entering a CBS
code for an AEII KeyBox, place your PDA inside the
eKEY shell.
2. Select ENTER CBS CODE from the eKEY menu.
3. Enter the 7-digit CBS code and select OK. If your PDA
is inside the eKEY shell, press Enter on the shell.
Once your eKEY software is activated with the CBS code for a
particular KeyBox, follow the standard procedure for releasing
the key container. You can access the KeyBox until the listing
agent changes the KeyBox settings or until you enter a CBS code
for a different KeyBox.