Grizzly Pallet Jacks H6287-h6289 - Manual

Specifications
MODEL H6287-H6289
PALLET JACKS
INSTRUCTIONS
Copyright © JANUAry, 2009 By grizzly iNdUstriAl, iNC. rEVisEd AUgUst, 2009 (Bl)
WARNINg: NO PORTION Of THIS MANUAL MAy bE REPRODUCED IN ANy SHAPE
OR fORM WITHOUT THE WRITTEN APPROvAL Of gRIzzLy INDUSTRIAL, INC.
#Bl11348 priNtEd iN ChiNA
Model H6287 H6288 H6289
Capacity 1,000 lbs. 4,000 lbs. 5000 lbs.
Overall fork
Dimensions
15"W x
31"l
27"W x
47 1 ⁄
2
"l
27"W x
48"W
Individual
fork Width
4" 6" 6 3 ⁄
8
"
Minimum
fork Height
2 1 ⁄
2
" 3" 3"
Maximum
fork Height
6" 7 1 ⁄
2
" 7"
Recommended Tools
Needle Nose pliers ............................................ 1
hammer ............................................................. 1
standard screwdriver ........................................ 1
Wrench or socket 10mm (Model h6287-88) ..... 1
Wrench or socket 13mm (Model h6289) .......... 1
Wrench or socket 16mm (Model h6289) .......... 1
Wrench or socket 24mm (Model h6289) .......... 1
Assembly (Model H6287/H6288)
1. remove the cotter pin shown in figure 2,
then slide the alignment pin all the way out of
the right side of the bracket.
Inventory (figure 1) Qty
figure 1. pallet jack inventory (Model h6289
shown).
A
B
A. Fork Frame ................................................. 1
b. handle ........................................................ 1
C. roll pin 5 x 35mm
(Model h6287/h6288, Not shown) ............ 1
D. o-ring replacement Kit
(Model h6289, Not shown) ........................ 1
figure 2. Cotter pin location.
Alignment pin
Cotter pin
2. pull the chain out of the bottom of the han-
dle.
Bracket