GE 2-9762 - Manual (Page 6)

6
D
ESKTOP
I
NSTALLATION
If you don't charge the handset battery properly (for 12 hours)
when you first set up the phone, performance of the battery will
be compromised.
3
TONE/PULSE switch
PHONE NO.
1
2
3
4
5
6
7
8
9
0
CHARGE
IN USE
PAGE / FIND
RINGER
OFF ON
VOLUME
CHANNEL
FLASH
3 2 1 DEF ABC
JKL MNO GHI
TUV WXY
4 6 5
9 8 7 PRS
TONE OPER # * 0
MEMORY REDIAL
PHONE
RINGER switch CHARGE/IN USE light
5
4
1. Remove the base plate on the
bottom of the phone.
2. Plug the telephone line cord into a
modular jack.
3. Plug the power supply cord into
an AC outlet.
4. Set the TONE/ PULSE switch to
TONE for touch-tone service, or
PULSE for rotary service. If you
don’t know which type of service
you have, check with the phone
company.
5. Raise the base antenna.
6. Turn on the RINGER switch so the
handset rings for incoming calls.
7. Place handset in the base to
charge for 12 hours. The CHARGE/
IN USE light comes on indicating
that the battery is charging.
2