GVision 3.54 - Manual (Page 5)

Maintenance Items In 3.51
• An incompatibility with Sony’s Acid 6 that caused no audio output from GVI
when hosted in Acid 6 has been corrected.
• Rare instances of GVI crashing when exporting to GSI have been addressed.
• Previously, when running in standalone mode, it was not possible to change
output channel selections after the sampler had been reset. This has been fixed.
• The filter Turbo Mode in the Quick Edit section of GVI is specific to the low-pass
filter. Previously, it was possible for the UI to present Turbo Mode enabled with
a different filter selected. Now, when Turbo Mode is enabled, the filter type is
switched to low-pass automatically.
• The list of recently used files has been moved to below the list of factory content.
• Previously, using the Load menu to load a GSI file onto a MIDI channel was
incorrectly performing a stack operation. This has been fixed in 3.51.
• The FX button in the MIDI Mixer has been renamed to GP. When illuminated,
this indicates that a GigaPulse encoded instrument has been loaded on that
channel. The associated pull down menu allows access to that GigaPulse UI. It is
still possible to access the GigaPulse UI for an encoded instrument via the
GigaPulse toolbar icon when that instrument’s MIDI channel is selected in the
MIDI Mixer.
Known Issues In 3.54
• For use with Ableton Live, GVI should be installed into the Steinberg VST
directory instead of the default TASCAM directory.
• It is currently necessary to uncheck the Fast Bounce checkbox when bouncing a
GVI track in SONAR.
• It is not currently possible to open the ASIO control panel of the Echo AudioFire
12 from within the GVI Configuration window.
• Patch changes do not work in SONAR 6. It is expected that a SONAR 6 update
will fix this problem.
5