GIGABYTE AMD Socket 754 Processor Motherboard GA-K8VT800-RH - Manual (Page 43)

BIOS Setup - 43 -
English
2-9 Load Fail-Safe Defaults
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
` Standard CMOS Features
` Advanced BIOS Features
` Integrated Peripherals
` Power Management Setup
` PnP/PCI Configurations
` PC Health Status
` Frequency/Voltage Control
Esc: Quit KLJI: Select Item
F8: Q-Flash F10: Save & Exit Setup
Load Fail-Safe Defaults
Top Performance
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Load Fail-Safe Defaults (Y/N)? N
Fail-Safe defaults contain the most appropriate values of the system parameters that allow minimum system
performance.
2-8 Top Performance
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
` Standard CMOS Features
` Advanced BIOS Features
` Integrated Peripherals
` Power Management Setup
` PnP/PCI Configurations
` PC Health Status
` Frequency/Voltage Control
Esc: Quit KLJI: Select Item
F8: Q-Flash F10: Save & Exit Setup
Load Fail-Safe Defaults
Top Performance
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Top Performance
Disabled.........................[„]
Enabled..........................[ ]
KL: Move ENTER: Accept
ESC: Abort
Please note that by overclocking your system through the increase of the DDR voltage, damage
to the memory may occur.
DIMM OverVoltage control
Auto Supply DIMM voltage as DIMM required. (Default value)
+0.1V Increase DIMM voltage +0.1V.
+0.2V Increase DIMM voltage +0.2V.
If you wish to maximize the performance of your system, set "Top Performance" as "Enabled".
Disabled Disable this function. (Default Value)
Enabled Enable Top Performance function.
"Top Performance" will increase hardware working speed. Different system configuration (both hard-
ware component and OS) will effect the result. For example, the same hardware configuration might not
run properly with Windows XP, but works smoothly with Windows NT. Therefore, if your system is
not perform enough, the reliability or stability problem will appear sometimes, and we will recommend
you disabling the option to avoid the problem as mentioned above.