GE EPM 5200 - Manual (Page 81)

CHAPTER 12: GROUPS 4, 5, AND 6 – SET LIMITS AND RELAYS
GE Multilin EPM 5000 series Advanced Power Meters 77
MAX/MIN
LIMITS
KVAR
PF
KW
KVA
FREQ KWH KVAH
AC VOLTS
AC AMPS
POWER
N C B A
MAX
MIN
A
N
B
N
C
N
A
B
B
C
C
A
LM2
LM1
NEXT
PHASE
VOLTS AMPS POWER
Step 3:
a. Press AMPS once.
!
Lower display is replaced with three dashes.
! Follow this step for DISABLING LIMITS:
MAX/MIN
LIMITS
KVAR
PF
KW
KVA
FREQ KWH KVAH
AC VOLTS
AC AMPS
POWER
N C B A
MAX
MIN
A
N
B
N
C
N
A
B
B
C
C
A
LM2
LM1
NEXT
PHASE
VOLTS AMPS POWER
MAX/MIN
LIMITS
KVAR
PF
KW
KVA
FREQ KWH KVAH
AC VOLTS
AC AMPS
POWER
N C B A
MAX
MIN
A
N
B
N
C
N
A
B
B
C
C
A
LM2
LM1
NEXT
PHASE
VOLTS AMPS POWER
Step 4:
a. Press AMPS once to Disable the Limit.
!
The display blanks momentarily, then the disabled
settings appears in middle and lower displays.
!
The Set Above/Below will be set to below.
!
Trip Relay 1 will be disabled.
!
Trip Relay 2 will be disabled.
!
The Setup Level will be set to 0000.
Step 5:
a. Press VOLTS to change current Set Above/Below,
Trip Relay 1, and Trip Relay 2 settings.
!
This toggles the segments UP (above limit) or DOWN
(below limit).
b. Press AMPS to store.
c. Press VOLTS to toggle the second segment UP
(enable Relay 1) or DOWN (disable Relay 1).
d. Press AMPS to store.
e. Press MAX/MIN/LIMITS to proceed to entering the
limit value.
f. Press AMPS to store.