GE Gas Ranges - Manual (Page 25)

25
How to set
the 27
″
oven for
self-cleaning
The clean cycle takes about 5 hours plus about
30 minutes to cool down.
1 Push in the CLEAN selector button on the
right hand side of the control panel above
the thermostat dial.
2 Set the thermostat dial to CLEAN.
• Cooling blower turns on.
• The OVEN ON light and HEATING light
turn on.
• The DOOR LOCKED light turns on.
3 When cleaning has finished, push the OFF
selector button.
The blower and the OVEN ON light will turn
off once the cycle has finished.
The door latch will open automatically after the
oven temperature falls below 550°F.
27 ″ oven control
After a
clean cycle
If white spots remain, remove them with warm
sudsy water and rinse thoroughly with a
vinegar and water mixture. These deposits are
usually a salt residue that cannot be removed
by the clean cycle.
If the oven is not clean after one clean cycle,
repeat the cycle.
You may notice some white ash in the oven.
Wipe it up with a damp cloth after the oven
cools.