Gefen EXT-DVIDL-2-HDMIR - Manual (Page 8)

5
1 Power LED Indicator
This input indicator will become active once the included 24V DC power adapter
has been properly connected to a power source.
2 Reset Button
This button will reset the unit and force all input/outputs to re-initialize.
3 Active Link LED Indicator
This LED indicator will activate once a link has been detected from the source
device to the output device.
4 10-Bit/12-Bit Selector Switch
This switch will set either the 10-bit or 12-bit color modes. This switch is only
active when the Main Switch is in the ON position.
5 Master Switch
This switch will enable/disable the use of the extended color modes switch;
10-Bit/12-Bit Selector Switch
6 HDMI Output
This port will accept a single HDMI capable output device via an HDMI type A
connector.
7 DVI-DL Input
This port will accept a single DVI-DL (proprietary signal) input device via a DVI-I
type connector.
8 24V DC Power Input
This input will accept power from the included 24V DC power supply. Connect
the power supply to the unit and an available power source.
PANEL DESCRIPTIONS