Grizzly 1/2" AIR IMPACT WRENCH G5346 - Manual

Introduction
Delivering 7000 RPM and a maximum torque of
230 ft/lbs., this
1 ⁄
2
" Impact Wrench is an excellent
choice for anyone seeking professional qual-
ity and performance. This pressure adjustable
wrench offers forward and reverse at you finger-
tips and rubber bumpers for protection. Sockets
not included.
Inventory
A. Air Impact Wrench ...................................... 1
Operation
Tool requires 90 PSI to operate correctly.
To improve tool lifespan, use a filter/lubricator/
regulator as shown in
Figure 2. Otherwise, lubri-
cate daily with a couple drops of pneumatic tool oil
directly into the air fitting as shown in
Figure 3.
MODEL G5346
1 ⁄
2
" AIR IMPACT
WRENCH
INSTRUCTION SHEET
Figure 1. Model G5346.
Figure 3. Lubricating directly into air fitting.
If you need help with your new pneumatic tool,
call our Tech Support at: (570) 546-9663.
COPYRIGHT © FEBRUARY, 2006 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#PC8045 PRINTED IN TAIWAN
EYE INJURY HAZARD!
Always wear safety glasses
during use to prevent
serious personal injury!
INJURY HAZARD!
Always disconnect tool from
air to prevent unexpected
operation during service!
EXPLOSION HAZARD!
Never exceed 120 PSI!
Quick
Connector
Quick
Coupler
Air Hose
Quick
Coupler
Quick
Connector Lubricator
Filter
Regulator
Air
Compressor
Your
Tool
Figure 2. Installing your tool.