Garmin GPSMAP 190-00557-00 - Manual (Page 41)

GPSMAP 76Cx Owner’s Manual 5
M
aIn
M
enu
Interface Setup Page
Use when connecting to a computer.
To access the Interface Setup page:
From the Setup Menu, select Interface.
Serial Data Format—sets the data format to one of
the following:
GARMIN—the proprietary format used
to exchange waypoint, route, track log and
MapSource data with a computer.
NMEA In/NMEA Out—Supports input and
output of standard NMEA 0183 version 3.01 data.
TEXT OUT—Allows ASCII text output of
location and velocity information. No input.
NONE—Provides no interfacing capabilities.
USB Mass Storage—allows the microSD card to be
used as a USB Mass Storage device. It also allows
transfer of Track Log Data to Garmin MapSource.
•
•
•
•
To activate USB Mass Storage for HCx USB Mass Storage for HCx
units:
1. Connect the unit to a computer.
2. Select USB Mass Storage, and press
ENTER.
3. Double click My Computer to observe a new
Removable Drive listing.
To view information for the microSD card:
Press MENU prior to opening the USB Mass
Storage page and, select Card Info.
To transfer files to the microSD card:
1. Double-click the My Computer icon.
2. Browse the computer for the file.
3. For a computer, select the file,
Edit > Copy.
NOTE: If you have several network drives
mapped to your computer, log on without
connecting to the network or click Start >
Settings > Control Panel > Administrative
Tools > Computer Management > Storage >
Disk Management and remap a drive letter
for the storage device.
4. After the transfer, end the USB cable connection.