Gefen 2x1 DVI KVM Switcher - Manual (Page 7)

Connecting and Operating the 2x1 DVI KVM Switcher
How to Connect the 2x1 DVI KVM Switcher to your devices
1- Connect the supplied cables from your fi rst computer into the DVI In 1, USB In 1,
and Audio In 1 connection in the back of the 2x1 DVI KVM Switcher.
2- Connect the supplied cables from your second computer into the DVI In 2, USB In 2,
and Audio In 2 connection in the back of the 2x1 DVI KVM Switcher.
3- Connect the monitor to the DVI Out connection.
4- Connect your USB devices (e.g. keyboard, mouse) into the USB Out.
5- Connect your speakers to the Audio Out.
6- Plug the 5VDC power supply into the 2x1 DVI KVM Switcher.
How to Operate the 2x1 DVI KVM Switcher
1- Use the front panel push button to switch between sources.
2- Use the optional RMT-2 wired remote control to remotely toggle between sources.
Operation Notes
When turning on or rebooting your computers, the 2x1 DVI KVM Switcher must
be selected to the computer that is booting until the computer completes the boot
cycle. This step can be eliminated using the Gefen DVI Detective.
If you loose your picture when switch from source 1 to source 2 or viasaversa
you will require a DVI Detective.
4