Grizzly H7679 - Manual (Page 12)

H7679 2" Nailer Kit -10 -
A jammed nail must be cleared before using
the nailer again.
To clear a jammed nail from the dis-
charge area:
1. DISCONNECT NAILER FROM THE
AIR SUPPLY!
2. Unlatch and pull the magazine all the
way back.
3. Remove the nail stick from the maga-
zine.
Clearing Jammed
Nails
Figure 7. Nose opened to clear a jam.
Nose Cover
Nose Release
Lever
Nose Tip
4. Open the nailer nose with the nose
release lever ( Figure 7).
5. Dislodge the jammed nail with a tool
that will fit in the slot on the underside
of the nose, like needle nose pliers.
6. Throw the damaged nail away and
insert a new nail stick that only contains
clean, undamaged nails. DO NOT use
dirty or damaged nails!
7. Push the magazine all the way in until
the catch lever locks.