Grizzly G0705 - Manual (Page 33)

Model G0705 (Mfg. since 09/09)
-31-
spindle height
2. loosen the thumb screw on the rim surface of
the handwheel dial. turn the dial until the "0"
lines up with the index line. tighten the thumb
screw.
3 turn the handwheel according to the distance
you want to move the quill downward. each
complete revolution equals 0.108".
to lock the quill , tighten the quill locking lever to
lock the spindle for milling operations ( figure 35).
the Model g0705 has coarse downfeed levers
and a micro-adjustment handwheel. to operate
the downfeed levers, simply pull forward and
down on the lever nearest you. the spindle will
go down until you stop pulling or until it hits the
depth stop.
to operate the micro-adjustment handwheel:
1. tighten the locking knob located on the cen-
ter of the hub for the downfeed levers ( figure
34). this transfers control from the downfeed
levers to the micro-adjustment handwheel.
figure 34. Micro-adjustment handwheel.
locking Knob
Micro-adjustment
handwheel
figure 35. Quill locking.
Quill locking
lever
handwheel dial