Gefen EXT-HDMI1.3-1FO - Manual (Page 11)

7
RECEIVER UNIT DESCRIPTIONS
1 RS-232 Output Port
Connect a controlling device to this port.
2 Locking HDMI Output Port
Connect a HDTV display to this HDMI port
3 IR Window
Receives signals from the Hi-Def source IR remote control unit. The IR signals
are sent back to the source device, when using an IR Blaster.
4 Calibration Indicator
This LED will alternate from red to green during the calibration procedure. The
LED will turn solid green once the calibration procedure has been completed.
5 Power Indicator
This two-color LED will turn bright red once the included 5V DC locking power
supply has been properly connected to the unit and the locking power supply
has been connected to an available wall outlet. This LED will turn bright green
once the Sender unit and Receiver unit are communicating correctly.
6 5V DC Locking Power Connector
Connect the included 5V DC Locking Power Supply to this receptacle.
7 IR Extender Port
Connect an IR Extender cable (Gefen part # EXT-RMT-EXTIR) to this port.
8 Fiber Optic Connector (SC-Type)
This connector accepts 1 strand of SC-terminated fi ber optic cable that will link
the Sender Unit and Receiver Unit together. The Gefen Extender for HDMI 1.3
Over One Fiber with IR will only accept multi-mode fi ber optic cabling.