Grizzly H3253 - Manual (Page 14)

Model H3253, H3254, H3255 Spray Gun -14 -
Lubrication
Lubricate the following areas with a non-
silicon spray gun lubricant after cleaning.
A. Atomizing Cap Threads
B. Air Valve Packing
C. Trigger Pin
D. Air Flow Control Valve
E. Pattern Control
F. Fluid Control Knob
Allow the lubricant to coat threads, and run
into gun body to lubricate all moving parts
and seals.
Figure 17. General lubrication points.
A
B
C
D
E
F