Ge monogram, Built-in advantium, 120 oven with accessory drawer – GE Monogram ZSC1202NSS User Manual

Page 3

Advertising
background image

For answers to your Monogram,

®

GE Profile

or

GE

®

appliance questions, visit our website at

ge.com or call GE Answer Center

®

service,

800.626.2000.

130316

Specification Created 11/08

Listed by

Underwriters

Laboratories

Dimensions and Installation Information (in inches)

ZSC1201NSS Advantium Installation with

Accessory Drawer

• Maintain 36-3/4" minimum height from the floor to the

cutout in any single or combined installation.

• Allow 2-1/8" case trim overlap on the sides and 7/8" overlap

on the bottom. Allow 1-1/8" overlap at the top of the oven.

ZSC1201NSS Advantium and Accessory

Drawer Installed over a Monogram

Warming Drawer

Additional clearances between the cutouts may be

required. Check to be sure the oven supports above the

warming drawer do not obstruct the required interior

depth and height. See warming drawer installation

instructions for details.

36-3/4" Min.

30"

23-1/2"

Construct Solid

Bottom Min. 3/8"

Plywood

Supported by

2 x 4 or 2 x 2

Runners all

Four Sides

2" Min

Per Warming

Drawer

Requirement

25-1/4"

21"

ZSC1201NSS Advantium and Accessory Drawer

Installed over a Monogram Oven

Additional clearances between the cutouts may be required.

See oven installation instructions for details.

30"

23-1/2"

21"

45-1/4"

Construct Solid

Bottom Min. 3/8"

Plywood

Supported by

2 x 4 or 2 x 2

Runners all

Four Sides

2" Min.

Per Oven

Requirement

2" Min.

Per warming drawer requirement

25-1/4"

ZSC1201NSS Advantium and Accessory Drawer

Installed over a Monogram Oven and

Warming Drawer

Additional clearances between the cutouts may

be required. See warming drawer and oven installation

instructions for details.

ZSC1201NSS and ZX2201NSS Accessory - GE Monogram Built-in Advantium Oven and Accessory Drawer

Important: These installation cutouts include the ZX2201NSS accessory drawer.

22-1/4"

29-3/4"

21-1/2"

Recessed

Depth

30"

23-1/2"

25-1/4"

Min.

21"

36-3/4"

Min.

Construct

Base

Min. 3/8"

Plywood

Supported

by 2x4 or 2x2

Runners all

Four Sides

36-3/4”

Min.

45-1/4”

Recommended

ZSC1201NSS with ZX2201NSS

GE Monogram

®

Built-In Advantium

®

120 Oven with Accessory Drawer

Important: Any

installation with an

accessory drawer

must be installed

36-3/4" minimum

from the floor to the

cutout. The combined

Advantium and

accessory drawer

cannot be installed

below a countertop.

Advertising
This manual is related to the following products: