GE 29568 - Manual (Page 11)

11
Installing the Phone
Connecting the Telephone Line
NOTE: The unit is shipped from the factory for
placement on a level surface.
1. Choose an area near a telephone wall jack (RJ11C), and
place your cordless telephone on a level surface, such as
a desktop or tabletop, or you may mount it on the wall.
. Plug one end of the telephone line cord into the TEL
LINE jack at the top of the base and the other end into a
modular jack.
. Place the handset into the cradle.
. Adjust the HANDSET RECEIVER VOLUME switch to the
desired listening level: HI, MID, or LO
5. Adjust the RINGER VOLUME switch to the desired setting:
HI, LOW or OFF.
6. Adjust the SPEAKER VOLUME switch to the desired
listening level.