Garmin zumo 450 - Manual (Page 66)

0 GPSMAP 400/500 Series Owner’s Manual
Appendix
User Card Not found, Please insert Card—attempted to transfer
user data without an SD card containing user data being present in
the SD card slot.
warning: auto-guidance route starting and ending position
moved due to safe depth settings—the auto-guidance route was
calculated but the starting and ending positions were moved because
of safe depth settings.
water Speed Sensor is Not working—the speed sensor is not
detected. Check the connections.
water Temperature alarm—sonar has reported a temperature
above, below, inside, or outside the specified values.
waypoint already Exists—you entered a waypoint name that
already exists in memory. Modify the waypoint name or delete the
existing waypoint.
waypoint Memory full—you have saved the maximum number
of waypoints. Delete unwanted waypoints to make space for new
entries.
Capturing Screenshots
You can capture a screenshot of any screen displayed on your unit as
a bitmap (.BMP) file and then transfer it to your computer.
To capture screenshots:
1. Insert an SD card into the SD card slot on the front of the unit.
2. Select
Configure > System > Beeper/Display .
3. Select Screenshot Capture to turn screenshot captures On .
4. When you are on a screen you want to capture, press and hold
the HOME button for at least six seconds.
5. Select OK when the Screenshot Taken window is displayed.
To copy the screenshots to your computer:
1. Remove the SD card from the chartplotter and insert it into an SD
card reader that is attached to a computer.
2. From Windows Explorer, open the Garmin\scrn folder on the SD
card.
3. Copy the appropriate .BMP file on the card and paste it to any
location on the computer.
Caring for the Unit
The case is constructed of high-quality materials and does not
require user maintenance, except cleaning.
Cleaning the Case
Clean the unit’s outer casing (except for the screen) using a cloth
dampened with a mild detergent solution and then wipe dry. Avoid
chemical cleaners and solvents that may damage plastic components.