Grizzly G4003 User Manual
Manual insert
Copyright © MArCh, 2008 By grizzly industriAl, inC.
Warning: no portion of this manual may be reproduced in any shape
or form Without the Written approval of grizzly industrial, inc.
#Cr10598 printed in ChinA
the Model g4002/g4003 lathe is shipped without oil. you must fill the headstock and apron with oil, and
complete the
lubrication procedures outlined in the maintenance section on page 27. if you run this
lathe without oil, even for a short period of time, drivetrain parts will be damaged and your lathe warranty
will be void. We recommend using iso 68 or a good grade non-detergent sAe 30W motor oil in your lathe.
Make sure to change the oil immediately after lathe break-in.
If you have any questions about this manual insert or machine lubrication and break-in, please contact
Grizzly Technical Support at (570) 546-9663 or email [email protected].
model g4002/g4003
gear head metal
lathe
manual insert
GEARBOXES MUST
BE FILLED WITH OIL!
NO OIL SHIPPED WITH
MACHINE!
Requires ISO 68
or Non-Detergent
SAE 30W Motor Oil.