Grizzly T23084 - Manual (Page 5)

T23084 (Mfg Since 11/10) -3 -
INTRODUCTION
No list of safety guidelines is complete,
because every work environment is
different. Always consider safety first
and use common sense. Failure to
use this tool with caution and respect
could result in serious personal
injury.
Specifications Foreword
The specifications, details, and
photographs in this manual represent
the Model T23084 as supplied when the
manual was prepared. However, owing to
Grizzly’s policy of continuous improvement,
changes may be made at any time with no
obligation on the part of Grizzly.
If you have any comments regarding this
manual, please write to us at the following
address:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
E-Mail: [email protected]
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
Web Site: http://www.grizzly.com
Arbor Speed .........Variable 0–11,000 RPM
Arbor Size ..........................................
5 ⁄
8
"-11
Grinding Wheel Diameter ........................ 5"
Grinding Wheel Bore ..............................
7 ⁄
8
"
Grinding Wheel Type .............................. 27
Air Inlet ...........................................
1 ⁄
4
" NPT
Average Air Consumption ............... 6 CFM
Maximum Air Pressure .................... 90 PSI
Weight ................................................4 lbs.
Inventory
Figure 1. Model T23084 Inventory.
B
A
C
D
Description Qty
A. Handle ................................................ 1
B. Angle Grinder Assembly w/Wheel ..... 1
C. Quick Disconnect Coupler ................. 1
D. Arbor Wrench ..................................... 1
E. Flange Spanner Wrench .................... 1
Assembly
Thread the handle into the housing, as
shown in
Figure 1 above.
E