Great Dane Super Surfer Series II GSKH2561S - Manual (Page 20)

Service Engine - 18
SERVICE ENGINE
Lubricating Deck Lift Pivot Points
c
MX20104
• Lubricate two front deck lift pivot grease fittings (A) and two rear deck lift
pivot grease fittings (B).
Lubricating Pump Idler Pivot
c
MX15095
• Lubricate one pump idler pivot grease fitting (A).
Lubricating Mower Deck Spindles
c
MX15287
• Lubricate three mower deck spindle grease fittings (A).
Lubricating Mower Deck Idler Pivot
c
MX20106
• Lubricate one deck idler pivot grease fitting (A).
Lubricating Mower Deck Push Arms
c
MX20107
• Lubricate two push arm grease fittings (A), one located on each side of
the machine.
Service Engine
Avoid Fumes
c
Engine Oil
Use oil viscosity based on the expected air temperature range during the
period between oil changes.
Use oil that meets the following specification:
• See the engine manufacturer’s owner’s manual provided with your
machine for the correct specifications.
CAUTION: Avoid injury! Engine exhaust fumes contain
carbon monoxide and can cause serious illness or death.
Move the machine to an outside area before running the
engine.
Do not run an engine in an enclosed area without adequate
ventilation.
• Connect a pipe extension to the engine exhaust pipe to
direct the exhaust fumes out of the area.
• Allow fresh outside air into the work area to clear the
exhaust fumes out.