GE JP311BN - Manual (Page 13)

PROBLEM POSSIBLE CAUSE
CALROD* SURFACE
●
Difficulty be the main distribution of
UNITS circuit tripped oven circuit breaker, the main fuse or the
WORK PROPERLY m&n circuit breaker, depending on the supply.
involved, reset If box uses’
cartridge-type) should be changed ONLY SOMEONE
ELECTRICAL CIRCUITS. If after of procedure% the
fuse circuit breaker call for service.
NOTE: Apartment tenants or owners request building
to perform this calling service.
Drip pans set in the
Surf&% controls are not properly or unit control is
for unit you using.
●
Surface units are plugged in solidly.
If you need more help... call, toll free:
GE Answer
800.626.2000
consumer information service
13