GE JP311BN - Manual (Page 4)

CONTROLS
Infinite Heat Controls
At both OFF and HI positions, there is a slight
niche so control “clicks” at those positions; “click” on
the word HI marks the highest setting; the lowest
setting is the word LO. In a quiet kitchen, you may
hear slight “clicking” sounds during cooking,
indicating heat settings selected are being maintained.
Switching heats to higher settings always shows a
quicker change than switching to lower settings.
How to Set the Controls
Step 1. Grasp control knob and
push down.
Step 2. Turn the knob to desired
heat setting.
Control must be pushed in to
set only from OFF position.
When control is in any position
other than OFF, it may be
rotated without pushing in.
Be sure you turn the control knob
to OFF when you finish cooking.
An indicator light will glow when
a surface unit is on.
Guide for Using Heats
HI (7)—Bring water to a
MEDIUM HIGH (5-@—Fast fry, pan broil;
maintain fast boil on large amount of food.
MED (4)—Saute and brown; maintain slow boil on
large amount of food.
MEDIUM after starting at HI;
cook with little water in covered pan.
/
. .
LO (l)—Maintain serving temperature of most foods.
NOTE:
1. At HI (7) or MEDIUM HIGH (5–6), never leave
food unattended. cause smoking; greasy
may catch fire.
2. At LO (1) or MEDIUM LOW (2–3), melt
chocolate, butter on small element.