Grizzly Extreme Series Jointer G9953ZX - Manual (Page 15)

Extreme series Jointer (Mfg. since 9/11)
-13-
Wear safety glasses dur-
ing the entire setup pro-
cess!
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
SEcTION 3: SETup
read through the entire SETup section to under-
stand the procedures and items required to cor-
rectly move, place, and assemble your machine.
the following are needed to complete the setup
process, but are not included with your machine:
Description Qty
• Forklift or hoist (rated for 1500 lbs) ............ 1
• lifting straps (rated for 1000 lbs. each) ..... 2
• assistants ...............................................
at least 1
• safety glasses ........................................
1 pair per person
• precision level ........................................... 1
• Metal Floor shims ..................................
as Needed
• Floor Mounting hardware .......................
as Needed
• Cleaning solvent & shop rags ..............
as Needed
• precision straightedge 6' ........................... 1
• phillips screwdriver #2 ............................... 1
• hex Wrench 10mm ..................................... 1
• Wrench 18mm ............................................ 1
Needed for Setup
your machine was carefully packaged for safe
transportation. remove the packaging materials
from around your machine and inspect it. if you
discover the machine is damaged, please imme-
diately call Customer Service at (570) 546-9663
for advice.
save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, inventory the contents.
unpacking
The Extreme Series
Jointer is a heavy
machine. Serious per-
sonal injury may occur
if safe moving methods
are not used. To be safe,
get assistance and use
power equipment rated
for at least 1500 lbs. to
move the shipping crate
and remove the machine
from the crate.