GE 27959 - Manual (Page 40)

40
H
EADSET AND
B
ELT
C
LIP
O
PERATION
C
ONNECTING AN
O
PTIONAL
H
EADSET TO THE
H
ANDSET
For hands free conversation:
1. Connect the optional headset to the
HEADSET jack as shown. The
handset receiver and microphone are
disabled when the headset is
connected to the handset.
2. Adjust the headset to rest comfortably
on top of your head and over your ear.
3. Move the microphone to
approximately 2 to 3 inches from
your mouth.
4. Press the TALK/callback button to answer or place
a call.
C
ONNECTING THE
B
ELT
C
LIP
1. Attach the belt clip by inserting the clip into the slots on
either side of the handset.
2. Snap the belt clip into place.
D
ISPLAY
M
ESSAGES
The following indicators show the status of a message or of the unit.
ERROR Caller ID information was interrupted during
transmission or the phone line is excessively noisy.
ENTER NAME You should enter a name in one of the 10
memory locations.
DELETE ALL? Prompt asking if you want to erase all
Caller ID records.
DELETE CALL ID? Prompt asking if you want to erase the current
Caller ID record that is shown on the display.
Slots
Headset jack
Headset plug