Grizzly G6042/3 - Manual (Page 7)

G6042/G6043 18 Gauge Stapler Kit -6 -
OPERATION
Loading Stapler
To load your stapler:
1. Disconnect the air supply from the
stapler!
2. Push the magazine latch in the direc-
tion shown in Figure 1 .
3. Pull back the magazine cover until it
stops.
Figure 1. Releasing magazine latch.
Figure 2. Loading staples into stapler.
5. Push the magazine cover forward
until the magazine latch locks in
place.
4. Point the stapler up and insert a stick
of staples into the magazine as shown
in Figure 2 . Make sure that the point-
ed ends of the staples point in the
same direction as the stapler nose
piece.