GE ZGU48L6R - Manual (Page 10)

10
FINALIZE INSTALLATION
Place the burner grates over the burners. Press corner
of the grate to the cooktop. The grates should be seated
and should not rock.
The grill and griddle are secured with screws at the
front. They are designed to be stationary and should not
be removed.
The griddle has two leveling screws beneath the rear
flue cover that can be used to adjust to the desired slope.
The center screw is for shipping purposes only and can
be removed.
Installation
INSTALLATION CHECKLIST
❑ Double check to make sure everything in this manual
has been completed. Rechecking steps will ensure
safe use of the cooktop.
❑ Make sure all controls are left in the OFF position.
❑ Make sure the flow of combustion and ventilation air
to the cooktop is unobstructed.
❑ The serial plate for your cooktop is located beneath
the ledge trim on the left side, just above the left knob.
In addition to the model and serial numbers, it tells
you the ratings of the burners and the type of fuel
and pressure the cooktop was adjusted for when it
left the factory.
❑ When ordering parts, always include the serial
number, model number and a code letter to ensure
proper replacement parts.
❑ Recheck Steps:
Double check to make sure everything in this manual
has been completed. Rechecking steps will ensure
safe use of the cooktop.