Chime tune setting – GE 19208 User Manual
Page 2
The wireless door chime Kit has two components:
Chime (receiver) Push-Button (Transmitter).
Chime Tune Setting
All wireless chimes may have more than one push button. The chime tune for
each push button is set with dip switches 1-3.
Single Push Button Kit: If you purchased a kit with a single push button, the
chime tune will be set to Ding Dong from the factory.
Dual Push Button Kit: If you purchased a kit with two push buttons, one push
button will be set to Ding Dong and the other push button will be set to
Westminster from the factory.
The following instructions explain how to change the tune on any wireless push
button.
1. Remove the battery from the push button transmitter.
2. Locate the 3 dip switches shown below.
3. Select the desired chime sound from the table below.
Chime Sound Table
Position
1
2
3
Westminster
ON
OFF
OFF
Ding
Dong
OFF
ON
OFF
Knock
OFF
OFF
ON
Bronze Chime ON
ON
OFF
Cuckoo Clock ON
OFF
ON
Foghorn
OFF
ON
ON
Gong
ON
ON
ON
ON: Switch On
OFF: Switch Off