Gefen 8x1 DVI - Manual (Page 7)

Connecting and Operating the 8x1 DVI Switcher
How to Connect the 8x1 DVI Switcher to your devices
1 Connect the supplied DVI cables from the DVI sources into the DVI Switcher Inputs.
2 Connect the cable from your display (monitor or projector) into the DVI Out of the
8x1 DVI Switcher.
How to Operate the 8x1 DVI Switcher
1 Use the RMT4-IR remote control port to remotely switch between sources.
2 Alternatively, use an RS-232 control system to switch between sources.
Operation Notes
The 8x1 DVI Switcher can also be powered from input 1, as long as the device is on and
supplying 5V to the DVI connector.
4