Genie CE - Manual (Page 26)

24 Genie GS-2032 and Genie GS-2632 Part No. 82784
Operator's Manual Second Edition • Second Printing
Error Indicator Light On
If the error indicator light is on, push
in and pull out the red Emergency
Stop button to reset the system.
If the light stays on, tag and remove the machine
from service.
Error Indicator Light Flashing
If the error indicator light is flashing,
the platform is overloaded and no
functions will operate. An alarm will
sound at the platform controls.
Push in and pull out the red Emergency Stop
button. The error indicator light will be off.
Remove weight from the platform. If the platform is
still overloaded, the light will flash again.
Drive Select Switch
Machine on incline symbol:
Low range operation for inclines
OPERATING INSTRUCTIONS
To Drive
1 Press the drive function select button.
2 Press and hold the function enable switch on the
control handle.
3 Increase speed: Slowly move the control handle
off center.
Decrease speed: Slowly move the control
handle toward center.
Stop: Return the control handle to center or
release the function enable switch.
Use the color-coded direction arrows on the
platform controls and on the platform to identify
the direction the machine will travel.
Machine travel speed is restricted when the
platform is raised.
Battery condition will affect machine performance.
Machine drive speed and function speed will drop
when the low battery indicator light is on or when
the last light on the battery level indicator is
flashing.