GE 29893 User Manual
Page 20
20
R
EMOTE
A
CCESS
You can access your answering system from any touch-tone phone from another location by
entering your 3-digit security code (the default security code is 1 2 3, but you can change it.)
Be aware that remote functions do not work with rotary or push-button pulse-dialing
phones.
To access your answering system:
1. Call your telephone number.
2. After you hear the beep that follows the greeting, enter your 3-digit security code. The unit
confirms your code with a beep. To bypass the greeting, you can enter your 3-digit
security code any time while the greeting is playing.
The unit waits for a remote command for 20 seconds after the correct security code has been
entered. Menu selections can be made while the menu is playing.
NOTE:
The unit answers on the 10th ring when it is turned off or the memory is full. To
access the answering system, enter the 3-digit security code after the beep. If memory is
full, play messages and erase some of them to restore memory.
NOTE:
After the unit plays the remote menu, it waits 20 seconds for a command, then
disconnects.
R
EMOTE
A
CCESS
C
OMMANDS
Play new message
1
Play all messages
2
Repeat messages (during message playback)
5
Play previous message (during message playback)
6
Skip to next message (during message playback)
7
Erase message (during message playback)
0
Stop playback (during message playback)
4
Turn answering system on/off
3
End call
4