Grizzly G9957 - Manual (Page 8)

-6- G5959/G9957 12" Table Saw
Push Paddles
Push paddles provide added leverage and sup-
port when ripping or crosscutting wide work-
pieces. We offer a number of push paddles in the
Grizzly catalog. See
Figure 2.
Featherboard
Easily made from scrap stock, featherboards
provide an added degree of protection against
kickback. To make a featherboard, cut a 30-
40° angle at one end of the board and make a
number of end cuts at approximately
1 ⁄
4
" apart
and 2" to 3" deep. We also offer a number of
featherboards in the Grizzly catalog. See
Figure 3.
Figure 1. Zero Clearance Table Inserts.
Figure 2. Push Paddles.
Figure 3. Featherboard.