Gilson 600CM - Manual (Page 5)

4
SAFETY INSTRUCTIONS
SAFETY PRECAUTIONS:
This is the industry’s safety alert symbol. This symbol calls attention to items or
operations that could be dangerous. This symbol can be found throughout this manual
and on safety decals on the mixer. Read these messages carefully.
The following precautions are suggested to help prevent accidents. Read and
practice the following precautions before operating this equipment. Equipment
should be operated only by those who are responsible and have been properly
instructed.
1. Read all operating and maintenance instructions before operating or servicing
mixer. Test run empty prior to actual use.
2. A mixer is only as safe as its operator. Give complete and undivided attention to
the operation of the mixer.
3. Know how to stop the mixer and the engine instantly.
4. Always have all guards and safety devices attached and in place before operating
mixer. Close engine housing during operation.
5. Keep inexperienced and unauthorized people away from the mixer at all times.
6. Never leave the mixer unattended while it is running.
7. Shut off engine or disconnect the electric motor before making any adjustments or
putting hands or tools in the drum.
8. Do not overfill the drum. Do not exceed the mixer’s rated capacity.
9. Do not smoke while refueling the engine. Shut off the engine and allow it to cool
before refueling. Do not spill fuel.
10. Block mixer wheels when mixing.
11. Use safety chains while towing mixer.
12. Keep the mixer in good operating condition. Loose or damaged parts are
dangerous.
13. Avoid loose clothing that could get caught in moving parts or on control levers.
14. Do not add material to the drum while stopped. Start the drum before adding
material.
15. Keep all warning, caution and safety instruction labels in good condition.
Replace missing, damaged or illegible labels.